Vana přídavná OE Alu/olej - Typ 1/3/CT/CZ motory (1960 »)

Alu přídavná vana oleje 265 x 230 x 40 mm náplň 0.95 L (vysoká zátěž).

Spodní hliníkové víko je plné o průměru 150 mm a s výpustným šroubem oleje. Plnoprůtokový filtr oleje, lze také vyčistit. Žebrování zvyšuje účinnost chlazení a náplň prodloužuje výměnu motorového oleje.

Extra 0.95 litre oil sump with "Lifetime" filter.

Using an additional oil sump, the oil content increases, so there is always enough oil is present for long cornering and rapid acceleration causing the oil pump no air is sucked, also provides the extra added oil for better cooling. This cooling is further increased because the crankcase under the existing sump is mounted in the middle of the wind, the result is immediately noticeable when you have oil temperature gauge on board, this will allows several degrees lower than before. With the increase of oil will also remain longer in good condition, this course does not mean you can go screwing the drain intervals.

T.1/3 engines r.v. 8/60 » (1.2 - 1.6 incl. race) not 25 + 30 HP
CT/CZ engines